One of the options we offer for floor covering is the Gladiator® Tile Floor Covering. It covers cracked or stained floors without the need for any time consuming preparation or hassles with liquid coatings,
Gladiator® Tile Floor Covering provides a clean looking and durable surface capable of holding heavy vehicles. The tiles are part of a complete flooring system that also includes flow-through Drain Tiles to allow access to floor drains as well as Edge Trim pieces that create a finishing touch. The 1 ft. x 1 ft. tiles are engineered to handle the temperature extremes of the garage, resist common chemicals found in the garage, and snap together easily allowing custom designed patterns and borders in under-vehicle and wall-to-wall applications.
Underwriter Laboratories Classified Gladiator® Tile Floor Covering contains a fire retardant additive and is UL Classified in accordance with ASTM E-648-03 (Standard method for Critical Radiant Flux of floor covering systems using a radiant heat source). Gladiator® Tile Floor Covering is also UL Classified for slip resistance.
Key Features:
Available In Six Colors
Black, White, Charcoal, Silver, Red and Blue
UL Classified For Fire and Slip Resistance
Gladiator® Tile Floor Covering is investigated for resistance to fire and is UL Classified in accordance with ASTM E-648 (Standard method for Critical Radiant Flux of floor covering systems using a radiant heat source). Gladiator® Tile Floor Covering is also UL Classified for slip resistance.
Holds Heavy Vehicles
The durable tiles hold heavy vehicles and have a weight capacity rating of 250 lbs. per square inch.
Stain Resistant Material
The premium grade material resists stains from common garage spills including: gasoline, motor oil, anti-freeze, brake fluid, petroleum grease, bleach, lacquer thinner, and common herbicides and insecticides.
Installs Without Adhesives
The interlocking mechanism used to connect the tiles keep the tiles firmly in place on the floor without the need for adhesives.
Under-Vehicle or Wall-to-Wall Installation
Tiles can be placed under vehicles for partial floor coverage or wall-to-wall for full floor coverage.
Installs Easily and Quickly
Wall to wall installation in most two car garages takes only a few hours. Under-vehicle and single stall installations snap together even more quickly with just a rubber mallet. Unlike epoxy and paint, complicated cleaning and preparation, multiple coatings, and curing time between coats and prior to initial use are not required (the floor covering can also be driven on immediately after installation).
Covers Cracks and Stains
Quickly hides unsightly cracks, stains, and chipped or peeling paint. Unlike thin coatings, floor tiles will not crack when new surface cracks in the concrete appear.
Non-Porous Surface Prevents New Stains on Concrete
The non-porous and stain resistant floor tile material helps protect porous concrete floors from new stains.
Easy to Clean In or Out of the Garage
The tiles can be cleaned in the garage or, if desired, separated into large sections and moved out to the driveway for a thorough cleaning.
Slip Resistant Tread Plate Pattern
The tread plate pattern matches the family look of other Gladiator® components and provides a slip resistant surface that also allows Gladiator® modules with caster to roll smoothly.
Removable and Transportable
Unlike permanent coatings, the tile floor covering system can be removed and transported for use elsewhere should you move to a new home.
Easily Repaired If Damaged
Simply swap out only the damaged tiles should replacement become necessary.
10-Year Limited Warranty
Gladiator® Tile Floor Covering provides a clean looking and durable surface capable of holding heavy vehicles. The tiles are part of a complete flooring system that also includes flow-through Drain Tiles to allow access to floor drains as well as Edge Trim pieces that create a finishing touch. The 1 ft. x 1 ft. tiles are engineered to handle the temperature extremes of the garage, resist common chemicals found in the garage, and snap together easily allowing custom designed patterns and borders in under-vehicle and wall-to-wall applications.
Underwriter Laboratories Classified Gladiator® Tile Floor Covering contains a fire retardant additive and is UL Classified in accordance with ASTM E-648-03 (Standard method for Critical Radiant Flux of floor covering systems using a radiant heat source). Gladiator® Tile Floor Covering is also UL Classified for slip resistance.
Key Features:
Available In Six Colors
Black, White, Charcoal, Silver, Red and Blue
UL Classified For Fire and Slip Resistance
Gladiator® Tile Floor Covering is investigated for resistance to fire and is UL Classified in accordance with ASTM E-648 (Standard method for Critical Radiant Flux of floor covering systems using a radiant heat source). Gladiator® Tile Floor Covering is also UL Classified for slip resistance.
Holds Heavy Vehicles
The durable tiles hold heavy vehicles and have a weight capacity rating of 250 lbs. per square inch.
Stain Resistant Material
The premium grade material resists stains from common garage spills including: gasoline, motor oil, anti-freeze, brake fluid, petroleum grease, bleach, lacquer thinner, and common herbicides and insecticides.
Installs Without Adhesives
The interlocking mechanism used to connect the tiles keep the tiles firmly in place on the floor without the need for adhesives.
Under-Vehicle or Wall-to-Wall Installation
Tiles can be placed under vehicles for partial floor coverage or wall-to-wall for full floor coverage.
Installs Easily and Quickly
Wall to wall installation in most two car garages takes only a few hours. Under-vehicle and single stall installations snap together even more quickly with just a rubber mallet. Unlike epoxy and paint, complicated cleaning and preparation, multiple coatings, and curing time between coats and prior to initial use are not required (the floor covering can also be driven on immediately after installation).
Covers Cracks and Stains
Quickly hides unsightly cracks, stains, and chipped or peeling paint. Unlike thin coatings, floor tiles will not crack when new surface cracks in the concrete appear.
Non-Porous Surface Prevents New Stains on Concrete
The non-porous and stain resistant floor tile material helps protect porous concrete floors from new stains.
Easy to Clean In or Out of the Garage
The tiles can be cleaned in the garage or, if desired, separated into large sections and moved out to the driveway for a thorough cleaning.
Slip Resistant Tread Plate Pattern
The tread plate pattern matches the family look of other Gladiator® components and provides a slip resistant surface that also allows Gladiator® modules with caster to roll smoothly.
Removable and Transportable
Unlike permanent coatings, the tile floor covering system can be removed and transported for use elsewhere should you move to a new home.
Easily Repaired If Damaged
Simply swap out only the damaged tiles should replacement become necessary.
10-Year Limited Warranty
